
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-10 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 100 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X110-10 is a compact double-acting double-rod cylinder featuring an external extend stop. A front M10x1.25 adjustment screw lets you dial the outward travel down from the 110 mm maximum to 100 mm directly on the machine, eliminating the need for shims or part swaps during fine-tuning.
This 32 mm bore actuator utilizes a short riveted body to save axial mounting depth where a round-body or profile cylinder will not fit. It runs on a PT1/8 air port and features a fixed NBR bumper at each end to decelerate the stroke end. This SKU ships without a piston magnet, so it cannot host reed or electronic switches; choose the -S variant if sensing is required.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 110 mm |
| Adjustable range | 100 – 110 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 10 mm extend window to perfectly match new fixture heights during machine changeovers without disassembling the actuator.
Set a precise mechanical stop for light pressing tasks, relying on the fixed NBR bumper to absorb the end-of-stroke shock.
When sizing this actuator, consider the neighboring bores to ensure optimal performance.
This model is ideal for setups requiring on-site stroke tuning within the 100-110 mm window. It operates at 30-500 mm/s and uses a female M6x1.0 rod-end thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For a held load without live pressure, specify an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The M10x1.25 R screw shortens the extend stop by up to 10 mm, giving a usable range of 100-110 mm. This specific SKU lacks the -S magnet, so it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.