
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-100 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X110-100 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can dial the extend position anywhere between 10 and 110 mm directly on the machine, avoiding part swaps or shims. Retract remains full length. The short riveted body saves axial mounting depth where round-body or profile cylinders cannot fit.
The adjuster sets the mechanical stop, not the piston area. End shock is handled by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion. Note this SKU lacks a piston magnet, so it cannot accept reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-100 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 110 mm |
| Adjustable range | 10 – 110 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the actuation reach on a sorting line; the fixed NBR bumper absorbs end shock as the rod routes packages at 30-500 mm/s.
Set experimental probe depths in a lab fixture, adjusting the mechanical stop on the fly to find the exact 20.5 kg lift margin.
Choose this model if your setup-heavy line requires frequent on-site stroke tuning.
Confirm the 32 mm bore, 110 mm max stroke, 100 mm window, and PT1/8 port. This base SKU has no magnet and a female M6x1.0 rod-end thread. A plain cylinder does not hold position on air loss or valve centring; the piston drifts and the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The external R (M10x1.25) screw shortens the extend stroke by up to 100 mm, letting you set the stop anywhere from 10 to 110 mm. It acts purely as a mechanical stop and does not alter force or lock mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.