
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-50B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X110-50B is a compact double-acting double-rod cylinder featuring an external M10x1.25 adjustment screw that lets you dial the extend stop anywhere between 60 and 110 mm directly on the machine.
The short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit, while end-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. This specific SKU includes a male M10x1.25 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without changing to an -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 110 mm |
| Adjustable range | 60 – 110 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the male M10 rod extension on the fly for mixed packaging runs, ensuring precise folding contact points across different box heights.
Safely probe optimal clamping locations by threading the M10x1.25 adjuster inward, locking the mechanical stop once the ideal 241 N working load position is found.
This model is tailored for setups requiring frequent on-site stroke tuning without part swaps. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers—the piston will drift, as the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your requirements for the 32 mm bore, 110 mm maximum stroke, 50 mm adjust window, PT1/8 port, male M10x1.25 rod, and lack of a magnet before ordering.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
No, this specific SKU does not include a piston magnet. You must select an -S variant to utilize AirTAC reed or electronic switches in the body sensor grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.