verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-100

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-100 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 120 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke120 mm
  • Adjustable range20–120 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$74.66 $82.16Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-100

The AirTAC SDAJ32X120-100 is a compact double-acting double-rod cylinder featuring an external extend stop. An M10x1.25 adjustment screw lets you dial the forward end-position anywhere between 20 and 120 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.

This thin riveted-body design saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support position sensing without upgrading to the -S variant.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-100 Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-100
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke120 mm
Adjustable range20 – 120 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-100

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×120Maximum stroke length in mm.
-100Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-100 Is Used

precision_manufacturing

Adjustable Tooling Stops

Dial the extend position from 20 to 120 mm on the fly to accommodate multiple part lengths on the same machining fixture without swapping hardware.

straighten

Trial Positioning Jigs

Find the exact clamping depth during prototype runs, locking the mechanical stop once the optimal 20.5 kg vertical lift margin is achieved.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-100 the Right Cylinder?

Choose this unit when your fixture requires frequent on-site stroke tuning across a wide 100 mm window.

Confirm your parameters: 32 mm bore, 120 mm max stroke, 100 mm adjust window, PT1/8 port, female M6x1.0 rod-end thread, and no magnet. Remember that a plain cylinder drifts when air is lost or the valve is centered—the fixed NBR bumper only decelerates near the end of travel and acts as a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 20–120 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-100 FAQ

The theoretical maximum push force is 82 kgf at 1.0 MPa.

Turning the external M10x1.25 R screw shortens the extend stroke by up to 100 mm, yielding a usable forward range of 20 to 120 mm. This SKU has no piston magnet, so it cannot accept reed or electronic switches; you would need the -S variant for sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-100

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ32X120-100 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.