
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-20 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 100 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X120-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can dial the extend position down by up to 20 mm directly on the machine, yielding a usable extend range of 100 to 120 mm without changing shims or parts. Retract remains at the full 120 mm.
This model uses a short riveted body to save axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet and therefore cannot support reed or electronic sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 120 mm |
| Adjustable range | 100 – 120 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 100-120 mm extend stop during machine changeovers to accommodate different part heights without machining new spacers.
Set precise mechanical endpoints for prototype alignment stops, allowing operators to tweak the 20 mm window until the optimal geometry is found.
Choose this adjustable-stop version if your application requires frequent on-site stroke tuning or trial positioning during changeovers.
Confirm the specifications match your needs: 32 mm bore, 120 mm maximum stroke, 20 mm adjust window, PT1/8 port, female M6x1.0 rod-end thread, and no magnet (no -S). Crucially, a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The R (M10x1.25) screw mechanically shortens the extend stroke by up to 20 mm, giving a 100-120 mm range. It does not lock mid-stroke. This SKU has no piston magnet, so it cannot take a switch; the -S variant adds a magnet for reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.