
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-20B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 100 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X120-20B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M10x1.25 adjuster screw lets you dial the forward end-position anywhere between 100 and 120 mm directly on the machine, eliminating the need for shims or part swaps.
This variant features a male M10x1.25 piston rod thread and a PT1/8 air port. The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S option.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 120 mm |
| Adjustable range | 100 – 120 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 100 and 120 mm to set precise contact depth for variable-height inspection gauges without machining custom spacers.
Use the 20 mm tuning window to safely trial different material bend depths on a press setup, relying on the fixed NBR bumper to absorb end shock.
Choose this model if your assembly requires precise on-site stroke tuning across a 20 mm window during frequent changeovers.
Confirm your parameters: 32 mm bore, 120 mm maximum stroke, 20 mm adjustability, PT1/8 port, and a male M10x1.25 rod thread. Keep in mind that a plain SDAJ does not hold position or load when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel and the adjuster acts as a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The M10x1.25 adjuster screw mechanically shortens the extend stroke by up to 20 mm, allowing you to set the stop anywhere from 100 to 120 mm without changing the output force. This specific SKU lacks a piston magnet, so it cannot take a magnetic switch; you would need the -S variant for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.