
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-30B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X120-30B is a compact double-acting double-rod cylinder built for applications requiring precise extend positioning. An external M10x1.25 adjuster screw lets you dial the forward stop between 90 and 120 mm directly on the machine, eliminating the need for shims or part swaps.
This model features a male M10x1.25 piston rod thread and a short riveted body that saves axial mounting depth where space is tight. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 120 mm |
| Adjustable range | 90 – 120 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 90-120 mm extend stop to secure raw castings of varying widths in a CNC vise without swapping fixture plates.
Tune the male M10x1.25 rod extension on-site to fold different box heights precisely before tape application.
When sizing this 32 mm bore, evaluate your force requirements both ways. Choose this unit if your fixture requires on-site stroke tuning across a 90 to 120 mm window via the male M10x1.25 rod end.
Keep in mind that a plain SDAJ does not hold position or load when air is lost or the valve is centred. The fixed NBR bumper only decelerates the stroke near the end, and the R screw acts as a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 120 mm max stroke, 30 mm window, PT1/8 port, and male rod thread before ordering.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
This 32 mm bore cylinder features a PT1/8 air port.
This specific SKU lacks a magnet; you must select the -S option to use reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.