
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-40 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X120-40 is a double-acting compact cylinder featuring an external M10x1.25 adjuster screw that dials the extend stop from 80 to 120 mm directly on your equipment.
Its short riveted body drastically cuts axial mounting depth where a larger profile cylinder cannot fit. End-of-travel energy is managed solely by a fixed NBR bumper that decelerates the piston, meaning it is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 120 mm |
| Adjustable range | 80 – 120 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 80-120 mm extend stop during fixture swaps to accommodate varying part heights without machining new spacers.
Sweep the extend endpoint across the adjustment window to test multiple sensor targets and find the exact actuation geometry.
This specific configuration lacks the -S magnet, so it cannot accept reed or electronic switches. It uses a female M6x1.0 rod-end thread with a PT1/8 port. Remember that the mechanical adjuster only sets the extend endpoint; a plain cylinder will drift and cannot hold a load if air pressure drops, so deploy an external rod lock or pilot-operated check valve for secure holding.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
Turning the external R (M10x1.25) screw shortens the extend end-position by up to 40 mm, yielding a usable 80 to 120 mm stroke. This SKU lacks the -S magnet, so it cannot support position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.