
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-75 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X120-75 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A front R (M10x1.25) screw lets you dial the forward end-position anywhere between 45 and 120 mm directly on the machine, avoiding shims or part swaps. Retract remains full length, and the adjuster strictly sets the mechanical stop without altering pneumatic force.
The short riveted body saves axial mounting depth where round-body or profile units will not fit. End shock is handled by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion. Note this SKU lacks a piston magnet, so magnetic sensing is unsupported.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 120 mm |
| Adjustable range | 45 – 120 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 45 to 120 mm via the R screw to accommodate varied part depths during production line changeovers without machining new spacers.
Set the precise 241 N safe working force to tuck varying box flaps, relying on the fixed NBR bumper to absorb the end-of-stroke shock during rapid cycling.
Choose this specific 75 mm window model if your fixture changeovers demand extensive on-site extend tuning.
Confirm the 120 mm maximum stroke, 75 mm adjustability window, and PT1/8 port. The female M6x1.0 rod-end thread (male M10x1.25 optional on other variants) requires careful alignment to avoid side load. Because a plain cylinder drifts on air loss or valve centering, integrate an external rod lock or pilot-operated check valve for load holding. Operating speed spans 30-500 mm/s.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The M10x1.25 adjuster screw shortens the extend stroke by up to 75 mm, yielding a usable 45-120 mm range. This specific SKU has no piston magnet, so it cannot accept reed or electronic switches; you would need the -S variant for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.