
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-10 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 120 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X130-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A simple turn of the R (M10x1.25) screw lets you dial the forward end-position anywhere between 120 and 130 mm directly on the machine, eliminating the need for shims or part swaps during commissioning.
The short riveted body saves valuable axial mounting depth where a larger profile cylinder simply will not fit. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 130 mm |
| Adjustable range | 120 – 130 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 120-130 mm extend stop during initial tooling calibration to perfectly strike a formed part without swapping physical spacers.
Set a precise mechanical lower limit for a 20.5 kg vertical lift fixture, ensuring consistent positioning even if the 130 mm nominal stroke slightly overshoots.
This model is ideal for setups requiring on-site stroke tuning within the 10 mm window.
Confirm your requirements for the 32 mm bore, 130 mm maximum stroke, 10 mm adjustability, and PT1/8 port. This SKU features a female M6x1.0 rod-end thread and no magnet. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s within a pressure range of 0.15-1.0 MPa.
Turning the R (M10x1.25) screw shortens the extend stroke by up to 10 mm, giving a usable forward range of 120-130 mm. The screw acts purely as a mechanical stop and does not alter the output force. It is not a mid-stroke lock; the cylinder cannot hold a load if air is lost, so use an external rod lock for holding requirements.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.