
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-10B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 120 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X130-10B is a compact double-acting double-rod cylinder built for tight axial mounting spaces. A short riveted body saves footprint depth where larger profile alternatives fail to fit. It features an external R (M10x1.25) adjustment screw that lets you dial the extend stop down from 130 mm to 120 mm directly on the machine, eliminating the need for shims or part swaps during commissioning.
The unit comes with a male M10x1.25 piston rod thread and uses a fixed NBR bumper at each end to decelerate the stroke. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 130 mm |
| Adjustable range | 120 – 130 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 120-130 mm extend stop on machining fixtures to set precise cutting depths without fabricating new spacer rings.
Adjust the male M10x1.25 rod endpoint on packaging lines to route different carton sizes without changing the actuator body.
When sizing this 32 mm bore actuator, evaluate your force requirements bidirectionally.
Choose the SDAJ32X130-10B if your fixture requires precise 120-130 mm extend fine-tuning during frequent changeovers. Confirm your setup needs the male M10x1.25 rod thread, PT1/8 port, and the 10 mm adjustment window. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed NBR bumper only decelerates the end of travel and does not act as a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, withstands 1.5 MPa proof pressure, and runs at speeds of 30-500 mm/s across a -20 to +70 C temperature range.
Turning the external R (M10x1.25) screw mechanically shortens the extend stroke by up to 10 mm, giving a usable range of 120-130 mm. This stop adjustment does not alter the output force. This specific SKU lacks the -S magnet option, so it cannot accept reed or electronic switches; you would need the -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.