verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-20

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-20 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 110 to 130 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke130 mm
  • Adjustable range110–130 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$81.38 $88.88Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-20

The AirTAC SDAJ32X130-20 is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you dial the extend end-position anywhere between 110 and 130 mm directly on your machine, eliminating shims or part swaps.

The short riveted body saves critical axial mounting depth where round-body or profile cylinders cannot fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Note that exceeding the 120 mm standard stroke range makes this a nonstandard configuration, and this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-20 Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-20
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke130 mm
Adjustable range110 – 130 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-20

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×130Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-20 Is Used

precision_manufacturing

Trial Positioning Jigs

Dial the M10x1.25 screw to find the exact 110-130 mm extend point during prototype runs before locking down your final mechanical stop.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-20 the Right Cylinder?

Choose this model if your fixture requires on-site stroke tuning across a 20 mm window. Confirm your parameters: 32 mm bore, 130 mm max stroke, 20 mm adjustability, PT1/8 port, female M6x1.0 rod-end thread, and no magnet. A plain cylinder does not hold a load on air loss or valve centering—the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 110–130 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-20 FAQ

The external R (M10x1.25) screw shortens the extend stroke by up to 20 mm, giving a usable range of 110-130 mm. It acts only as a mechanical stop and does not lock mid-stroke; the cylinder drifts if air is lost.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-20

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ32X130-20 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.