
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-20B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 110 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X130-20B is a double-acting compact cylinder featuring an external extend stop. An M10x1.25 adjuster screw lets you dial the outward stroke on-site between 110 and 130 mm without changing parts.
The short riveted body minimizes axial mounting depth where space is tight. This specific unit includes a male M10x1.25 piston rod end and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 130 mm |
| Adjustable range | 110 – 130 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 110 to 130 mm during prototype runs to find the exact 402.1 N contact point without machining new spacers.
Swap product families and turn the M10x1.25 adjuster to fine-tune the outward reach, saving axial depth compared to bulkier actuators.
Set the precise push depth for carton flaps or film feeds, relying on the fixed NBR bumper to absorb the end shock at cycle completion.
When sizing this 32 mm bore actuator, evaluate your force margins carefully. Choose this specific model if your fixture requires on-site stroke tuning to hit an exact 110-130 mm extend position.
Confirm your parameters before ordering: 32 mm bore, 130 mm maximum stroke, 20 mm adjustment window, PT1/8 air port, male M10x1.25 rod thread, and no magnet. Note that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end of travel and does not function as a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
At 0.5 MPa this 32 mm bore cylinder pushes 402.1 N and pulls 345.6 N. At 0.7 MPa it pushes 563 N and pulls 483.8 N. The theoretical maximum push force is 82 kgf at 1.0 MPa.
Turning the external M10x1.25 screw shortens the extend end position from the 130 mm maximum down to 110 mm. This sets a mechanical stop and does not alter the force, nor does it lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.