verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30B

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 100 to 130 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke130 mm
  • Adjustable range100–130 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$81.38 $88.88Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30B

The AirTAC SDAJ32X130-30B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. A side-mounted M10x1.25 adjuster screw lets you dial the outward stroke anywhere between 100 and 130 mm without swapping parts.

This specific SKU includes a male M10x1.25 piston rod thread and lacks a piston magnet. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30B Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke130 mm
Adjustable range100 – 130 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30B

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×130Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30B Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 100 to 130 mm during die swaps to accommodate varying part heights without machining new spacers.

straighten

Long-Reach Alignment

Use the 130 mm outward travel to push parts into a fixture, relying on the fixed NBR bumper to absorb the final end shock.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30B the Right Cylinder?

When sizing this unit, look at both neighboring bores. Choose this 130 mm stroke version if your fixture requires a long reach with the ability to fine-tune the final 30 mm of approach distance.

Confirm your requirements for the PT1/8 port, the male M10x1.25 rod thread, and the 100-130 mm adjustment window. Note that because this SKU lacks the -S magnet, it cannot accept reed or electronic switches. Furthermore, a standard cylinder does not hold position upon air loss; for suspended loads, install an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 100–130 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30B FAQ

The theoretical maximum push force is 82 kgf at 1.0 MPa.

The external M10x1.25 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 130 mm maximum down to 100 mm. It does not alter the output force and is not a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ32X130-30B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.