
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-10 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X15-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M10x1.25) screw lets you dial the outward stroke down on-site anywhere between 5 and 15 mm, eliminating the need for shims or part swaps during commissioning.
Its short riveted body saves valuable axial mounting depth where a larger profile cylinder simply will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, and this specific SKU ships without a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 15 mm |
| Adjustable range | 5 – 15 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly readjust the outward position on the machine during product family changeovers, saving setup time by turning the M10x1.25 screw instead of swapping hardware.
Find the exact extended endpoint for a new assembly fixture by testing various stops within the 10 mm window before locking down the final mechanical position.
Stepping down to an SDAJ25 yields 245.4 N, whereas stepping up to an SDAJ40 provides 628.3 N.
Choose this adjustable model if your fixture requires frequent changeovers or trial positioning of the 5-15 mm outward travel. Confirm your setup needs a PT1/8 port, a 12 mm rod with a female M6x1.0 end thread, and no position sensing. Remember that the fixed bumper only decelerates the stroke end; a plain cylinder does not hold a load on air loss or valve centering, so deploy an external rod lock or pilot-operated check valve for suspended masses.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The R (M10x1.25) screw mechanically shortens the extend stop by up to 10 mm, giving a usable outward range of 5 to 15 mm. It sets the end position without changing the force, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.