
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-10B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X15-10B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M10x1.25 adjuster screw lets you dial the extend position anywhere between 5 and 15 mm directly on the machine, eliminating the need for shims or part swaps. Retract remains full length.
This variant features a male M10x1.25 piston rod thread and lacks a piston magnet. Its short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. End-of-stroke deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 15 mm |
| Adjustable range | 5 – 15 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 5 to 15 mm via the M10 screw during initial tooling clearance checks, ensuring precise contact without machining custom spacers.
When sizing this 32 mm bore, evaluate both neighbours.
This SKU is ideal for setups requiring frequent on-site stroke tuning between 5 and 15 mm. Confirm your port is PT1/8 and that the male M10x1.25 rod thread suits your mounting interface. Note that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end. For load holding without live pressure, use an external rod lock or pilot-operated check valve.
Quick checklist
The adjustable stop does not alter these force values.
The external M10x1.25 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 15 mm maximum down to 5 mm. This SKU lacks the -S magnet option, so it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.