verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 15 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke15 mm
  • Adjustable range0–15 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$33.72 $41.22Save 18% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20

The AirTAC SDAJ32X15-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M10x1.25 adjuster screw lets you dial the outward stroke down to any position between 0 and 15 mm directly on the machine, saving axial mounting depth where a round-body unit will not fit.

End-of-travel shock is handled by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the bore dictates a PT1/8 air port alongside a 12 mm rod. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20 Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke15 mm
Adjustable range0 – 15 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×15Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20 Is Used

precision_manufacturing

Short-Stroke Clamping

Dialing the extend stop between 0 and 15 mm allows operators to fine-tune clamping depth on delicate workpieces without swapping shims.

view_module

Compact Ejector

Fits into tight machine footprints to eject parts, using the fixed NBR bumper to absorb the impact of the 12 mm rod at cycle completion.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20 the Right Cylinder?

Choose this model if your fixture requires frequent on-site stroke tuning during changeovers. Remember that a plain cylinder cannot hold a load if air pressure drops or the valve centers—the piston will drift, as the fixed bumper only decelerates near the end and the R screw is a stop, not a lock. For suspended loads, specify an external rod lock or pilot-operated check valve. Confirm your 32 mm bore, 15 mm stroke, 20 mm window, PT1/8 port, female rod thread, and lack of magnet for this configuration.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–15 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20 FAQ

The theoretical maximum push is 82 kgf at 1.0 MPa.

The external M10x1.25 screw shortens the extend end-position by up to 20 mm, giving a usable extend range of 0 to 15 mm. It sets the mechanical stop without altering force, and the retract stroke remains full length.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ32X15-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.