
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X15-20B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M10x1.25) screw lets you dial the forward end-position down from the nominal 15 mm maximum to a zero stroke on the machine, eliminating shims or part changes during commissioning.
This thin riveted-body design saves axial mounting depth where round-body or profile cylinders will not fit. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. This specific SKU includes a male M10x1.25 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 15 mm |
| Adjustable range | 0 – 15 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reset the 0-15 mm forward position during product family changeovers on a shared line, avoiding the need to swap cylinder bodies.
Use the M10x1.25 adjuster screw to fine-tune the extend endpoint during prototype testing until the exact 20.5 kg vertical lift geometry is found.
This SDAJ32X15-20B configuration is ideal for operators needing frequent on-site stroke tuning for trial positioning.
Confirm the 32 mm bore, 15 mm maximum stroke, 20 mm adjust window, and PT1/8 air port suit your envelope. This variant ships with a male M10x1.25 rod thread and no magnet. Note that a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The external R (M10x1.25) screw mechanically shortens the extend stroke by up to 20 mm, allowing you to set the forward stop anywhere from 0 to 15 mm. It does not alter the force output, and the fixed NBR bumper handles end-of-stroke deceleration rather than acting as a lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.