verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X150-20S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X150-20S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 130 to 150 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke150 mm
  • Adjustable range130–150 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$104.91 $112.41Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X150-20S

The AirTAC SDAJ32X150-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can dial the extend position anywhere between 130 and 150 mm directly on your machine, avoiding part swaps.

This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches. Its short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. Note that the 150 mm stroke exceeds the 130 mm standard maximum for a 32 mm bore, making this a non-standard, made-to-order unit. End-of-stroke deceleration is handled by a fixed NBR bumper, not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X150-20S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X150-20S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke150 mm
Adjustable range130 – 150 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X150-20S

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×150Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X150-20S Is Used

precision_manufacturing

Custom Machine Tooling

Dial in the 130-150 mm extend stop during tooling changeovers to accommodate different part depths without fabricating new spacer shims.

science

Laboratory Positioning

Use the reed or electronic switch feedback and the M10x1.25 adjuster screw to set precise trial positions for testing apparatus.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X150-20S the Right Cylinder?

Choose this specific configuration if your application requires on-site stroke tuning within the 130-150 mm window. Confirm your requirements for bore, stroke, adjust window, PT1/8 port, the -S magnet, and female M6x1.0 rod thread. Remember that a plain cylinder does not hold its load on air loss or valve centering; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 130–150 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X150-20S FAQ

The R (M10x1.25) screw shortens the extend stroke by up to 20 mm, allowing on-site tuning between 130 and 150 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X150-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ32X150-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.