
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X20-20S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X20-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you shorten the forward stroke on-site across a 0 to 20 mm window without changing parts.
Its short riveted body minimizes axial mounting depth where round-body or profile variants will not fit. The unit relies on a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. Equipped with a built-in piston magnet, this version supports AirTAC reed or electronic switches for precise end-position detection.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X20-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 20 mm |
| Adjustable range | 0 – 20 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on-site during product family changeovers, saving setup time by avoiding shim swaps while maintaining a compact footprint.
Fine-tune the extend endpoint during prototype testing, safely limiting travel to a 20 mm maximum while the fixed NBR bumper absorbs end shocks.
Dropping down to an SDAJ25 provides 245.4 N, whereas stepping up to an SDAJ40 yields 628.3 N.
Choose this model if your fixture requires frequent on-site stroke tuning between 0 and 20 mm. Confirm your specifications: 32 mm bore, 20 mm maximum stroke, 20 mm adjust window, PT1/8 port, built-in magnet for sensors, and a female M6x1.0 rod-end thread. Note that a plain cylinder does not hold a load on air loss or valve centering; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The R (M10x1.25) screw shortens the extend stop by up to 20 mm, giving a usable extend range of 0 to 20 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.