verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-10B

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-10B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 25 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke25 mm
  • Adjustable range15–25 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$36.25 $43.75Save 17% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-10B

The AirTAC SDAJ32X25-10B is a compact double-acting double-rod cylinder featuring an external extend stop. Turning the R (M10x1.25) adjuster screw lets you dial the extend position anywhere between 15 and 25 mm directly on the machine, eliminating the need for shims or part swaps. Retract remains at the full stroke length.

The short riveted body saves axial mounting depth where larger profile cylinders will not fit. This specific SKU includes a male M10x1.25 piston rod end and lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S variant.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-10B Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke25 mm
Adjustable range15 – 25 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-10B

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×25Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-10B Is Used

precision_manufacturing

Probe Gauging Stations

Dial the extend stop between 15 and 25 mm to set precise contact depth for electronic testing probes without reprogramming the motion controller.

sync_alt

Rapid Format Changeovers

Adjust the male M10 rod end outward mechanically during packaging line size changes, saving minutes of manual repositioning per machine cycle.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-10B the Right Cylinder?

When sizing this 32 mm bore, evaluate your force requirements against its neighbors.

Choose this unit if your assembly line requires frequent on-machine stroke tuning between 15 and 25 mm. It operates at 30-500 mm/s with a PT1/8 port. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the fixed NBR bumper only decelerates the stroke end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, 10 mm window, male M10x1.25 rod thread, and lack of magnet for this build.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 15–25 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-10B FAQ

The theoretical maximum push is 82 kgf at 1.0 MPa.

The R (M10x1.25) screw mechanically shortens the extend stop by up to 10 mm, yielding a usable extend range of 15 to 25 mm. It does not alter force and is not a mid-stroke lock; the piston drifts if air is lost, so use an external rod lock for load holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X25-10B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ32X25-10B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.