Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-10S
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-10S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
- BoreØ32 mm
- Max stroke30 mm
- Adjustable range20–30 mm
- Adjuster threadM10×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-10S
The AirTAC SDAJ32X30-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M10x1.25 adjuster screw lets you dial the extend position down from 30 mm to 20 mm directly on the machine without changing parts.
The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Equipped with a built-in piston magnet, this unit supports AirTAC reed or electronic switches for position sensing.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-10S Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-10S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-10S Is Used
Trial Positioning Jigs
Use the M10x1.25 adjuster to step a probe or clamp out by millimetres during prototype runs, finding the exact contact point before locking the collar.
Carton Flap Tackers
Adjust the stroke on-site to accommodate varying box heights while maintaining a safe 241 N working load for consistent flap folding.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-10S the Right Cylinder?
Choose this specific model if your fixture requires on-site stroke tuning within the 20-30 mm window. Confirm your port size is PT1/8 and the rod end thread is female M6x1.0. The -S code indicates a magnet is present for sensing. Remember that a plain cylinder does not hold its load on air loss or valve centering; for a held load, specify an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 20–30 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M10×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-10S FAQ
This 32 mm bore cylinder features a PT1/8 air port.
Turning the external R (M10x1.25) screw shortens the extend stroke by up to 10 mm, giving a usable range of 20 to 30 mm. The included -S magnet works with AirTAC reed or electronic switches mounted in the body grooves for end-position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.