
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-10SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X30-10SB is a compact double-acting double-rod cylinder featuring an external extend stop. An M10x1.25 adjuster screw lets you dial the outward stroke down by 10 mm directly on the machine, yielding a usable extend range of 20 to 30 mm without swapping shims or parts. Retract remains full length.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male-thread piston rod (-B, M10x1.25) for secure tooling attachment. The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. End shock is absorbed by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 30 mm during initial fixture setup to find the exact clamping depth, avoiding part deformation before locking the M10x1.25 screw.
Quickly re-tune the outward stroke by up to 10 mm when switching product families on a line, saving the downtime of physically swapping cylinders.
When sizing this 32 mm bore, compare the real 0.5 MPa push forces both ways: stepping down to an SDAJ25 yields 245.4 N, while stepping up to an SDAJ40 provides 628.3 N. Choose this model when your fixture requires on-site stroke tuning to hit a precise endpoint.
Confirm the bore (32 mm), maximum stroke (30 mm), adjustment window (10 mm), and PT1/8 air port. This unit carries the -S magnet for position sensing and the -B male M10x1.25 rod thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the bumper only decelerates near the end. For load holding without live pressure, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The external M10x1.25 screw shortens the extend stop by up to 10 mm, giving a 20 to 30 mm range; it sets the mechanical stop and does not change force. The built-in -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.