Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20B
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 30 mm on the machine — no shims, no part change.
- BoreØ32 mm
- Max stroke30 mm
- Adjustable range10–30 mm
- Adjuster threadM10×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20B
The AirTAC SDAJ32X30-20B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can dial the forward stroke on-site from 10 mm up to 30 mm without changing parts.
This thin riveted-body design saves valuable axial mounting depth where larger profile or round-body units will not fit. The unit comes with a male-thread M10x1.25 piston rod (Ø12 mm) for direct load attachment. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20B Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 30 mm |
| Adjustable range | 10 – 30 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20B Is Used
Tooling Changeover
Dial the extend stop from 10 to 30 mm during machine changeovers to accommodate different workpiece heights without fabricating new spacers.
Press Fit Tuning
Fine-tune the insertion depth of a 20.5 kg vertical assembly by adjusting the mechanical stop, ensuring consistent seating without over-stroking.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20B the Right Cylinder?
Choose this model if your fixture requires on-site extend tuning between 10 and 30 mm.
Confirm your parameters: 32 mm bore, 30 mm maximum stroke, 20 mm adjust window, PT1/8 port, and a male M10x1.25 rod thread. Since this SKU omits the -S magnet, you cannot mount magnetic switches. Keep in mind a plain cylinder does not hold position if air pressure drops or the valve centres; the piston will drift. For suspended or vertical loads, install an external rod lock or pilot-operated check valve, as the fixed NBR bumper only decelerates near the end of travel and acts as a stop, not a brake.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 10–30 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M10×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20B FAQ
At 0.7 MPa the push increases to 563 N and the pull to 483.8 N. The theoretical maximum push is 82 kgf at 1.0 MPa.
Turning the R (M10x1.25) screw mechanically shortens the forward end position by up to 20 mm, allowing an extend range of 10 to 30 mm. It sets the stop position only and does not alter the output force or lock the piston mid-stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.