Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20SB
The AirTAC Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 30 mm on the machine — no shims, no part change.
- BoreØ32 mm
- Max stroke30 mm
- Adjustable range10–30 mm
- Adjuster threadM10×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20SB
The AirTAC SDAJ32X30-20SB is a compact double-acting single-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you shorten the forward stroke on-site across a 10 to 30 mm window without swapping shims or parts. Because the adjuster sets the mechanical stop rather than the piston area, output force remains identical to a standard 32 mm bore SDA, delivering 402.1 N of push at 0.5 MPa.
This thin riveted-body design saves valuable axial mounting depth where larger profile cylinders cannot fit. It includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches, and a male-thread piston rod (-B, M10x1.25) for secure tooling attachment. End shock is absorbed by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20SB Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 30 mm |
| Adjustable range | 10 – 30 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20SB
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20SB Is Used
Trial Positioning Jigs
Dial the M10x1.25 stop screw to find the exact 10 to 30 mm extend position during prototype runs, locking the 402.1 N force precisely where needed without part changes.
Rapid Format Changeovers
Adjust the extend endpoint on packaging lines in seconds to accommodate different carton depths, leveraging the compact riveted body to fit tight transfer arms.
Vertical Lift Stops
Safely lift 20.5 kg loads with a 2:1 margin by setting the mechanical stop, ensuring the male M10x1.25 rod threads securely into your lifting tooling.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20SB the Right Cylinder?
When sizing this unit, evaluate both neighboring bores: the SDAJ25 yields 245.4 N push at 0.5 MPa, while the SDAJ40 provides 628.3 N. The 32 mm bore is ideal when your application requires a safe working load around 241 N (roughly 60 percent of the 402.1 N capacity) or a vertical lift of approximately 20.5 kg with a 2:1 safety margin. Choose this specific model if your fixture setup demands frequent on-machine stroke tuning to dial in exact end positions.
Confirm the 32 mm bore, 30 mm maximum stroke, 20 mm adjust window, and PT1/8 port match your pneumatic supply. The -S code enables solid-state or reed sensing, while the -B code specifies the male M10x1.25 rod end. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centered; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 10–30 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M10×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20SB FAQ
This 32 mm bore double-acting cylinder provides 402.1 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum push of 82 kgf at 1.0 MPa. The adjustable stop does not alter these force figures.
Turning the external R (M10x1.25) screw shortens the forward stroke by up to 20 mm, giving a usable extend range of 10 to 30 mm. The included -S magnet allows tracking by AirTAC reed or electronic switches along the body grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-20SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.