verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-30SB

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-30SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke30 mm
  • Adjustable range0–30 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$43.49 $50.99Save 14% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-30SB

The AirTAC SDAJ32X30-30SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can dial the forward end-position from 0 to 30 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains full, and the adjuster strictly sets the mechanical stop without altering the pneumatic area.

The short riveted body minimizes axial mounting depth where space is tight. This unit includes a built-in magnet (-S) for AirTAC reed or electronic switches and a male-thread piston rod (-B, M10x1.25). End shock is handled by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-30SB Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-30SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke30 mm
Adjustable range0 – 30 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-30SB

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×30Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-30SB Is Used

precision_manufacturing

Tooling Changeover

Dial the 0-30 mm extend stop during fixture swaps to accommodate varying part heights without machining new spacers.

science

Prototype Positioning

Use the magnetic piston for electronic switch feedback while micro-adjusting the stroke to find the exact contact point.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-30SB the Right Cylinder?

Choose this if your fixture requires frequent on-site stroke tuning or trial positioning.

Confirm the 32 mm bore, 30 mm stroke, 30 mm adjust window, PT1/8 port, -S magnet, and male M10x1.25 rod thread. Note that a plain SDAJ does not hold a load if air pressure drops or the valve centres; the piston drifts. For suspended loads, integrate an external rod lock or pilot-operated check valve, as the fixed bumper only decelerates near the end of travel.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–30 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-30SB FAQ

At 0.5 MPa, push is 402.1 N and pull is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum push is 82 kgf at 1.0 MPa.

The M10x1.25 R screw shortens the extend stroke by up to 30 mm (usable range 0-30 mm) without changing the force. The built-in -S magnet allows tracking via AirTAC reed or electronic solid-state switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-30SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ32X30-30SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.