
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-30SBH is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X30-30SBH is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that saves mounting depth where round-body units fail to fit. An external R (M10x1.25) adjuster screw lets you dial the extend stop directly on the machine from 0 to 30 mm without shims or part swaps. This on-site tuning capability drastically simplifies commissioning and fine-tuning of end positions.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches, a male M10x1.25 rod thread, and high-temperature fluororubber (FKM) seals. A fixed NBR bumper decelerates the stroke ends, though it is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X30-30SBH |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 0-30 mm extend stop during rapid product changeovers to set new clamping depths without swapping out the entire actuator assembly.
Leverage the FKM seals and compact riveted body to fit into thermal cycling chambers, adjusting the mechanical stop precisely for trial positioning.
Choose this model when your fixture requires on-site stroke tuning within the 0-30 mm window.
Confirm the bore (32 mm), maximum stroke (30 mm), and adjustment window (30 mm) match your spatial limits, and note the PT1/8 air port. This variant includes the -S magnet for position sensing, the -B male M10x1.25 rod thread, and -H FKM seals for harsher thermal or oily environments. Remember that a plain cylinder does not hold its load when air is lost or the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
The R (M10x1.25) screw mechanically shortens the extend stroke by up to 30 mm, giving a usable extend range of 0-30 mm; it sets the stop position and does not alter force. The included -S piston magnet works with AirTAC reed or electronic solid-state switches mounted in the body grooves for end-of-stroke detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.