
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X35-20 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X35-20 is a compact double-acting double-rod cylinder featuring an external extend stop. Turning the M10x1.25 adjuster screw lets you dial the outward stroke anywhere between 15 and 35 mm directly on your machine, eliminating the need for shims or part swaps. Retract remains full length.
Its short riveted body drastically cuts axial mounting depth where round-body or profile units will not fit. End-of-travel energy is managed by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X35-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 35 mm |
| Adjustable range | 15 – 35 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 15 to 35 mm to accommodate varying raw casting widths on a milling fixture without machining custom spacers.
Set a precise mechanical stop for pressing lightweight bearings, using the fixed NBR bumper to decelerate the 20.5 kg safe load before impact.
When sizing this 32 mm bore, look at both neighbours. This model sits perfectly in the middle for medium-force tasks.
Choose this unit if your fixture requires frequent on-site stroke tuning or changeover adjustments. Confirm your parameters: 32 mm bore, 35 mm max stroke, 20 mm adjust window, PT1/8 port, female M6x1.0 rod thread, and no magnet. Note that a plain cylinder drifts when air is lost or the valve centres; the bumper only decelerates near the end and is not a lock. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The M10x1.25 screw mechanically shortens the extend end position from the 35 mm maximum down to 15 mm. It sets the stop without changing the force, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.