
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X35-40 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X35-40 is a compact double-acting double-rod cylinder featuring an external R (M10x1.25) adjuster screw. Turning this screw shortens the extend stop on-site, providing a usable extend range of 0-35mm without requiring shims or part changes. Retract remains full length, and the adjuster purely sets the mechanical stop without altering the pneumatic force.
Its short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. End shock is managed solely by a fixed NBR bumper which decelerates the piston, meaning it is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet and cannot support sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X35-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 35 mm |
| Adjustable range | 0 – 35 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 0-35mm extend position during machine changeovers to accommodate different fixture heights without disassembling the pneumatic line.
Use the external M10x1.25 screw to fine-tune the extend stop during initial prototyping until the optimal mechanical endpoint is found.
When sizing this 32mm bore, consider the neighbouring options.
This model is ideal for operators needing frequent on-machine stroke tuning during setup or changeovers. Confirm your parameters: 32mm bore, 35mm nominal stroke, 40mm adjust window, PT1/8 port, female M6x1.0 rod thread, and no magnet. A plain cylinder does not hold a load on air loss or valve centering; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa the push force is 402.1 N and the pull force is 345.6 N. At 0.7 MPa the push is 563 N and pull is 483.8 N. The theoretical maximum push is 82 kgf at 1.0 MPa.
The R (M10x1.25) screw shortens the extend stop by up to 40mm, yielding a usable extend range of 0-35mm. The screw is a mechanical stop, not a mid-stroke lock, and the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.