
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X35-40S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X35-40S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can dial the extend position from 0 up to 35 mm directly on your machine, avoiding shims or part swaps.
Its short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. The unit relies on a fixed NBR bumper at each end to decelerate the stroke end; it is not an adjustable air cushion. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic switches for position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X35-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 35 mm |
| Adjustable range | 0 – 35 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 0-35 mm extend stop during tool changeovers to accommodate varying part thicknesses without fabricating new spacers.
Leverage the compact riveted body to fit tight test fixtures, adjusting the stroke endpoint safely for delicate probes.
Choose this model if your fixture requires frequent on-site stroke tuning or trial positioning. Confirm your parameters: 32 mm bore, 35 mm max stroke, 40 mm adjust window, PT1/8 port, female M6x1.0 rod thread, and the -S magnet. Remember that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The R (M10x1.25) screw shortens the extend stop by up to 40 mm, allowing usable extensions from 0 to 35 mm; it sets the stop position without altering force. The built-in -S magnet works with AirTAC reed or electronic switches for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.