verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-10B

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-10B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke40 mm
  • Adjustable range30–40 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$39.77 $47.27Save 15% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-10B

The AirTAC SDAJ32X40-10B is a compact double-acting double-rod cylinder featuring an external extend stop. An M10x1.25 adjuster screw lets you dial the extend stroke on the machine between 30 and 40 mm without swapping shims or parts.

The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. This specific SKU includes a male-thread M10x1.25 piston rod and lacks a piston magnet, meaning it cannot host reed or electronic switches. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-10B Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke40 mm
Adjustable range30 – 40 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-10B

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×40Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-10B Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 30 to 40 mm during fixture swaps to align clamping points perfectly without machining new spacers.

straighten

Trial Positioning

Use the 10 mm adjustment window to probe the optimal engagement depth for a 20.5 kg vertical lift task before locking down the sequence.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-10B the Right Cylinder?

Choose this unit when your setup requires on-site stroke tuning across a 30 to 40 mm window. Confirm your requirements for the PT1/8 port, 10 mm adjustment range, and the male M10x1.25 rod thread.

Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred. The piston drifts, and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 30–40 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-10B FAQ

The M10x1.25 R screw mechanically shortens the extend stop from the 40 mm maximum down to 30 mm without altering force. This specific SKU lacks the -S magnet, so it cannot accept reed or electronic switches; you would need the -S variant for sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-10B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ32X40-10B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.