verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-20S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-20S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke40 mm
  • Adjustable range20–40 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$46.02 $53.52Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-20S

The AirTAC SDAJ32X40-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can dial the forward stroke down by up to 20 mm directly on the machine, yielding a usable extend range of 20 to 40 mm without swapping shims or parts.

Its short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot. The unit includes a fixed NBR bumper at each end to decelerate the stroke end, though it is not an adjustable air cushion. Equipped with a built-in piston magnet (-S), this model supports AirTAC reed or electronic switches for end-of-stroke sensing via the body sensor grooves.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-20S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-20S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke40 mm
Adjustable range20 – 40 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-20S

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×40Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-20S Is Used

packaging

Flap Folding Arms

Adjust the extend stop on the fly for varying carton depths, relying on the fixed NBR bumper to absorb the end-of-stroke shock safely.

science

Trial Positioning Rigs

Use the built-in magnet with an electronic switch to verify the adjusted endpoint during prototype testing before finalizing a mechanical stop.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-20S the Right Cylinder?

Confirm your required 20-40 mm adjust window, PT1/8 port, and the included magnet.

Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centred; the piston will drift. The fixed bumper only decelerates near the stroke end and the R screw is a mechanical stop, neither functions as a lock. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 20–40 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-20S FAQ

The theoretical maximum push is 82 kgf at 1.0 MPa.

The M10x1.25 R screw shortens the extend stroke by up to 20 mm, giving an effective 20 to 40 mm forward range while retract remains full. The -S suffix denotes a built-in piston magnet compatible with AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ32X40-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.