
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-30 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X40-30 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M10x1.25) screw lets you dial the forward end-position anywhere between 10 and 40 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
Its short riveted body significantly reduces axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 40 mm |
| Adjustable range | 10 – 40 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 40 mm on the fly to clamp raw castings of varying widths without swapping out entire actuators.
Iteratively adjust the extend position during prototype testing to find the exact engagement distance, taking advantage of the compact riveted body in tight test rigs.
Dropping down to an SDAJ25 yields 245.4 N, whereas stepping up to an SDAJ40 provides 628.3 N.
This model is ideal for operators who require frequent on-site stroke tuning between 10 and 40 mm to accommodate trial positioning. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centered; the piston drifts and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your requirements for the PT1/8 port, Ø12 mm rod, female M6x1.0 rod-end thread, and the 30 mm adjustment window before ordering.
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and the speed range is 30-500 mm/s.
The external M10x1.25 screw shortens the forward stroke by up to 30 mm, allowing the extend end to be set anywhere between 10 and 40 mm. The screw acts only as a mechanical stop and does not function as a mid-stroke lock; the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.