
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-30S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X40-30S is a compact double-acting double-rod cylinder featuring an external extend stop. An M10x1.25 adjuster screw lets you dial the extend position anywhere between 10 and 40 mm directly on the machine.
Its short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot. End-of-travel energy is managed by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion. Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic solid-state switches for precise position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 40 mm |
| Adjustable range | 10 – 40 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 40 mm during machine setup to accommodate different jig heights without fabricating custom spacers.
Iteratively set the exact extend position for sample probes, utilizing the built-in magnet to confirm the adjusted endpoint with a reed switch.
Choose this adjusted model if your application requires frequent on-site stroke tuning without part changes. Confirm your specifications: 32 mm bore, 40 mm maximum stroke, 30 mm adjust window, PT1/8 port, female M6x1.0 rod thread, and the -S magnet. Remember that a plain cylinder does not hold its load on air loss or valve centering; the bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
Turning the M10x1.25 R screw shortens the extend stroke by up to 30 mm, allowing usable positions between 10 and 40 mm. The -S code indicates a built-in piston magnet for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.