
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-10S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X45-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M10x1.25 adjuster screw lets you dial the extend position anywhere between 35 and 45 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains at the full stroke length.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. This unit includes a built-in piston magnet for AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the stroke end.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 45 mm |
| Adjustable range | 35 – 45 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 35-45 mm extend stop during machine changeovers to accommodate varying part heights without machining new spacers.
Use the M10x1.25 adjuster to set exact contact depth on delicate components, leveraging the compact body for tight cell layouts.
Choose this specific model if your fixture setup requires frequent trial positioning or fine-tuning of the extend endpoint within that 10 mm window.
Confirm your parameters: 32 mm bore, 45 mm maximum stroke, 10 mm adjustability, and PT1/8 air port. The -S code denotes the integrated magnet for sensing, and the rod end features a female M6x1.0 thread. Note that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum force is 82 kgf at 1.0 MPa.
The M10x1.25 R screw shortens the extend stop by up to 10 mm, giving a usable extend range of 35-45 mm without altering force. The -S option provides a built-in piston magnet compatible with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.