
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-40B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X45-40B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can dial the forward end-position down by up to 40 mm, yielding a usable extend range of 5 to 45 mm directly on the machine without changing parts.
This specific SKU includes a male M10x1.25 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without switching to the -S variant. The short riveted body saves valuable axial mounting depth where larger profile cylinders will not fit. End-of-stroke deceleration is handled strictly by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 45 mm |
| Adjustable range | 5 – 45 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 5 to 45 mm extend stop during initial part setup, allowing operators to fine-tune the approach without fabricating custom spacers.
Set the mechanical stop to push cartons of varying widths precisely, relying on the fixed NBR bumper to absorb the end-of-stroke shock.
Choose this male-rod (-B) configuration when your tooling requires an externally threaded M10x1.25 attachment point, and ensure your setup avoids side loading. The on-machine 5 to 45 mm adjustability is ideal for trial positioning during frequent changeovers. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centered; the fixed bumper only decelerates near the end, so integrate an external rod lock or pilot-operated check valve for load holding without live pressure.
Quick checklist
The theoretical maximum push force is 82 kgf at 1.0 MPa.
The external M10x1.25 screw shortens the extend stroke by up to 40 mm, giving a usable range of 5 to 45 mm. This screw acts only as a mechanical stop and does not lock the piston; for load holding without live air pressure, you must use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.