verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-40S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-40S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke45 mm
  • Adjustable range5–45 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$47.89 $55.39Save 13% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-40S

The AirTAC SDAJ32X45-40S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can dial the extend position anywhere between 5 and 45 mm directly on your machine without changing parts.

The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-40S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-40S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke45 mm
Adjustable range5 – 45 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-40S

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×45Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-40S Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 5 to 45 mm during machine changeovers to accommodate varying part heights without fabricating new spacer shims.

science

Prototype Positioning

Iterate on prototype actuation endpoints safely, relying on the fixed NBR bumper to absorb end-shock during trial movements.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-40S the Right Cylinder?

Choose this specific unit when your assembly requires frequent on-machine stroke tuning across a wide 5 to 45 mm window.

Confirm the required bore, 45 mm maximum stroke, 40 mm adjust window, and PT1/8 port. This variant includes the -S magnet for sensing and a female M6x1.0 rod-end thread. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centred; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 5–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-40S FAQ

The theoretical maximum push is 82 kgf at 1.0 MPa.

The R (M10x1.25) screw mechanically shortens the extend stroke by up to 40 mm, allowing usable endpoints between 5 and 45 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ32X45-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.