
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-50S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X45-50S is a compact double-acting double-rod cylinder featuring an external extend stop. An M10x1.25 adjuster screw lets you dial the outward stroke anywhere from 0 to 45 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains full length.
The short riveted body conserves axial mounting depth where a longer cylinder will not fit. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion. This specific unit includes a built-in piston magnet for AirTAC reed or electronic switches, enabling precise end-position detection in automated setups.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X45-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 45 mm |
| Adjustable range | 0 – 45 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 45 mm to clamp parts of varying heights on a single fixture without swapping hardware.
Fine-tune the outward reach during product line changeovers to establish new push endpoints rapidly via the M10x1.25 screw.
Safely creep the rod outward during initial commissioning to locate the exact 402.1 N contact point without risking overtravel.
Dropping to an SDAJ25 yields 245.4 N, whereas stepping up to an SDAJ40 provides 628.3 N. Choose this model if your fixture requires frequent on-site stroke tuning between 0 and 45 mm. Confirm your porting (PT1/8), rod thread (female M6x1.0), and that the -S magnet option is present for sensing. Note that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the end and the adjuster acts as a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum is 82 kgf at 1.0 MPa.
The M10x1.25 screw shortens the extend stop by up to 50 mm, giving a usable extend range of 0-45 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.