verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X5-10S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X5-10S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke5 mm
  • Adjustable range0–5 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$37.44 $44.94Save 16% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X5-10S

The AirTAC SDAJ32X5-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M10x1.25 adjuster screw lets you dial the extend position on the machine between 0 and 5 mm without changing parts.

Its short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot. The unit relies on a fixed NBR bumper at each end to decelerate the stroke end, which is not an adjustable air cushion. Equipped with a built-in piston magnet (-S), this model supports AirTAC reed or electronic solid-state switches for end-position sensing.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X5-10S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X5-10S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke5 mm
Adjustable range0 – 5 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X5-10S

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×5Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X5-10S Is Used

packaging

Carton Flap Folding

Fine-tune the folding finger position on the fly during packaging line changeovers, using the mechanical stop to accommodate varying box heights rapidly.

straighten

Light Pressing Tasks

Execute short-stroke alignment or pressing operations where the 20.5 kg vertical lift capacity is sufficient, relying on the fixed NBR bumper to absorb end shocks.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X5-10S the Right Cylinder?

When sizing this 32 mm bore actuator, evaluate your force requirements both ways.

Choose this specific configuration if your application requires on-site stroke tuning during initial commissioning or frequent product changeovers. Confirm your parameters match the 32 mm bore, 5 mm stroke, 10 mm adjustment window, PT1/8 port, female M6x1.0 rod-end thread, and the -S magnet option. Remember that a plain cylinder does not hold its load upon air loss or valve centering; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–5 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X5-10S FAQ

The adjustment screw does not alter these force values.

The M10x1.25 R screw shortens the extend stop by up to 10 mm, yielding a usable extend range of 0 to 5 mm while retract remains full stroke. The included -S magnet works with AirTAC reed or electronic solid-state switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X5-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ32X5-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.