
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-20S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X50-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can dial the forward stroke down by up to 20 mm directly on the machine, yielding a usable extension range of 30 to 50 mm without changing parts or shims. Retract remains full length.
Its short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. The unit includes a fixed NBR bumper at each end to decelerate the stroke end, though it is not an adjustable air cushion or a lock. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic switches for end-position confirmation.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 50 mm |
| Adjustable range | 30 – 50 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 50 mm during prototype tooling to find the exact 241 N safe working contact point without machining new spacers.
Adjust the stroke on-site when switching conveyor package sizes, using the M10x1.25 screw to reposition the pusher rapidly.
Tune the forward stop for different carton depths, relying on the fixed NBR bumper to absorb the 402.1 N impact at 0.5 MPa.
Choose this unit if your fixture requires on-site stroke tuning between 30 and 50 mm.
Confirm the bore, 50 mm maximum stroke, 20 mm adjust window, and PT1/8 port. This variant includes the -S magnet for sensing and a female M6x1.0 rod-end thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centered; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The R (M10x1.25) screw shortens the extend stop by up to 20 mm, giving a 30 to 50 mm range. The -S suffix means a built-in magnet is present for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.