
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-30S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X50-30S is a compact double-acting double-rod cylinder featuring an external extend stop. An M10x1.25 adjuster screw lets you dial the extend position anywhere between 20 and 50 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
This 32 mm bore unit saves valuable axial mounting depth where a round-body or profile cylinder will not fit. It includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and uses a fixed NBR bumper at each end to decelerate the stroke. The bumper is not an adjustable air cushion, and the adjuster is a mechanical stop rather than a mid-stroke lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 50 mm |
| Adjustable range | 20 – 50 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 50 mm via the M10x1.25 screw to adapt a 402.1 N press motion to different part heights without machining new spacers.
Fine-tune the push position on the fly during carton size changeovers, using the fixed NBR bumper to absorb the end-of-stroke shock safely.
When sizing this 32 mm bore actuator, consider the neighbouring bores for your force requirements. Choose this specific model if your fixture requires on-site stroke tuning within the 20-50 mm window.
Confirm the bore, 50 mm maximum stroke, 30 mm adjust window, and PT1/8 port suit your manifold. The -S code ensures compatibility with AirTAC reed or electronic solid-state switches. Remember that a plain compact cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For a securely held load without live pressure, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The M10x1.25 screw shortens the extend stop by up to 30 mm, giving a usable extend range of 20-50 mm without changing force. The -S code denotes a built-in piston magnet that works with both AirTAC reed and electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.