
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X55-10S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X55-10S is a double-acting compact cylinder featuring an external adjustable extend stop. An M10x1.25 adjuster screw lets you dial the forward end-position between 45 and 55 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
Its short riveted body drastically reduces axial mounting depth, fitting easily into tight spaces where round-body alternatives will not. The unit includes a built-in piston magnet for AirTAC reed or electronic switches, while a fixed NBR bumper handles end-of-stroke deceleration without acting as a mid-stroke lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X55-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 55 mm |
| Adjustable range | 45 – 55 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 45-55 mm extend stop during initial tooling setup to perfectly meet the workpiece without re-machining hard stops.
Quickly reposition the extend endpoint on packaging lines running multiple carton sizes, leveraging the 10 mm external adjustment window.
Safely test clamping pressure and reach during R&D prototyping by incrementally adjusting the stroke limit before finalizing the mechanical layout.
Stepping down to the SDAJ25 yields 245.4 N, whereas moving up to the SDAJ40 provides 628.3 N.
This specific configuration features a 55 mm maximum stroke with a 10 mm adjustment window, a PT1/8 port, a 12 mm rod, and a female M6x1.0 rod-end thread. The included -S magnet enables position sensing. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; for load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The M10x1.25 R screw shortens the extend stroke by up to 10 mm, yielding a usable 45-55 mm range while retract remains full. The built-in -S magnet allows tracking by AirTAC reed or solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.