
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X55-20S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X55-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M10x1.25 adjuster screw lets you dial the outward stroke from 35 to 55 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
Its short riveted body minimizes axial mounting depth, fitting easily into tight machinery envelopes where longer alternatives cannot. The built-in piston magnet supports AirTAC reed or electronic switches for precise end-position confirmation. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock without acting as a mid-stroke lock or adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X55-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 55 mm |
| Adjustable range | 35 – 55 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 55 mm via the M10x1.25 screw to accommodate varying part heights during machine setup without swapping cylinders.
Stepping down, the SDAJ25 provides 245.4 N, whereas stepping up to the SDAJ40 yields 628.3 N. Choose the SDAJ32X55-20S specifically when setup requires frequent trial positioning or on-site stroke tuning between 35 and 55 mm.
Confirm the 32 mm bore, 55 mm maximum stroke, 20 mm adjust window, and PT1/8 port. The -S suffix indicates the internal magnet is present for sensing, and the rod end features a standard female M6x1.0 thread. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The external M10x1.25 screw shortens the extend end-position by up to 20 mm, yielding a usable 35 to 55 mm range. The included -S magnet allows AirTAC reed or electronic switches to detect piston position via the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.