
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X55-30 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X55-30 is a compact double-acting double-rod cylinder featuring an external extend stop. A front R (M10x1.25) adjustment screw lets you dial the forward end position anywhere between 25 and 55 mm directly on the machine.
Its short riveted body drastically reduces axial mounting depth where larger profile or round-body units fail to fit. End shock is managed solely by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X55-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 55 mm |
| Adjustable range | 25 – 55 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 55 mm during machine setups to accommodate different jig heights without fabricating new spacers.
Set a precise mechanical endpoint for pressing bearings, ensuring consistent depth across batches using the fixed NBR bumper.
This makes the 32 mm bore ideal for medium-duty positioning.
Operators needing frequent changeovers or trial positioning will benefit from the 30 mm adjust window. Remember that the mechanical stop sets the endpoint but does not lock the rod; if air pressure drops or the valve centers, the load drifts. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve. This configuration specifies a 32 mm bore, 55 mm stroke, 30 mm window, PT1/8 port, female M6x1.0 rod thread, and no magnet.
Quick checklist
The theoretical maximum force is 82 kgf at 1.0 MPa.
Turning the external M10x1.25 R screw shortens the forward stroke by up to 30 mm, allowing usable extend positions between 25 and 55 mm. The retract stroke remains full. This SKU has no piston magnet, so it cannot support sensing switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.