
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X55-30B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X55-30B is a double-acting compact cylinder featuring an external adjustable extend stop. A front R (M10x1.25) screw lets you dial the forward end-position between 25 and 55 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains full length.
This unit features a male M10x1.25 piston rod thread and a short riveted body that saves axial mounting depth where larger profile cylinders will not fit. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; adding the -S option enables sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X55-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 55 mm |
| Adjustable range | 25 – 55 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 25-55 mm extend stop during machine setups to accommodate different part heights without machining new spacers.
Set precise end stops for prototype bracket bending, leveraging the 20.5 kg vertical lift capacity to hold workpieces securely.
Choose this male-rod (-B) model if your tooling requires an M10x1.25 threaded attachment. The air port is PT1/8, operating pressure is 0.15-1.0 MPa, and speed ranges from 30-500 mm/s.
This cylinder is ideal for setups requiring frequent on-site stroke tuning. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end, and the R screw is a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
Turning the R (M10x1.25) screw shortens the extend stroke by up to 30 mm, allowing any forward position between 25 and 55 mm. This specific SKU has no piston magnet, so it cannot take a switch; you must select the -S option for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.