Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40
The AirTAC Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.
- BoreØ32 mm
- Max stroke60 mm
- Adjustable range20–60 mm
- Adjuster threadM10×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40
The AirTAC SDAJ32X60-40 is a compact double-acting single-rod cylinder featuring an external adjustable extend stop. Turning the R (M10x1.25) screw lets you trim the forward stroke anywhere between 20 and 60 mm directly on the machine, while the retract remains full length. Because the adjuster only sets the mechanical stop rather than altering the piston area, output force stays identical to a standard SDA of this bore, delivering 402.1 N push at 0.5 MPa.
Its short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40 Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 60 mm |
| Adjustable range | 20 – 60 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40 Is Used
Machining Clamp Depth
Dial the extend stop from 20 to 60 mm to set exact clamping depth on raw castings without machining custom spacers.
Product Changeover
Shorten the forward stroke rapidly via the M10x1.25 adjuster when switching a packaging line to a different carton size.
Trial Positioning
Find the optimal push distance for a 402.1 N insertion task by turning the external screw during initial fixture commissioning.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40 the Right Cylinder?
When sizing pneumatics, evaluate both neighbouring bores: the SDAJ25 provides 245.4 N push at 0.5 MPa, whereas the SDAJ40 yields 628.3 N. This 32 mm bore generates 402.1 N at 0.5 MPa, translating to a safe working load of roughly 241 N (about 60 percent of capacity) and a vertical lift capability of approximately 20.5 kg with a 2:1 margin. Choose this model when your fixture requires precise on-site stroke tuning across a 20-60 mm window.
Confirm your parameters: 32 mm bore, 60 mm max stroke, 40 mm adjust window, PT1/8 port, female M6x1.0 rod thread, and no magnet. A plain cylinder drifts when air is lost or the valve centers, as the fixed bumper only decelerates near the end and the R screw acts as a stop, not a lock. To hold a load securely without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 20–60 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M10×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40 FAQ
This 32 mm bore double-acting cylinder provides 402.1 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The M10x1.25 R screw mechanically shortens the extend stop by up to 40 mm, giving a usable forward range of 20-60 mm without changing force. This specific SKU has no piston magnet, so it cannot take a switch; you must select the -S variant to use reed or electronic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.