
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X60-50B is a compact double-acting cylinder with an external adjustable extend stop. Turning the R (M10x1.25) screw lets you dial the extend position anywhere between 10 and 60 mm directly on the machine, avoiding part changes. The 50 mm adjustment window provides massive flexibility for trial positioning.
This variant features a male M10x1.25 piston rod thread and lacks a piston magnet. Its short riveted body saves valuable axial mounting depth where a round-body or profile cylinder will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion. Operating speed spans 30-500 mm/s, with a maximum pressure rating of 1.0 MPa.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 10-60 mm extend stop during prototype runs.
Swap product families and reposition the male M10x1.25 rod end via the R screw. The 50 mm window accommodates varied part heights without swapping cylinders.
Set the precise extend depth to prevent over-travel, relying on the fixed NBR bumper for end deceleration.
Dropping down to an SDAJ25 yields 245.4 N, whereas stepping up to an SDAJ40 provides 628.3 N.
Choose this specific configuration if your fixture requires on-site stroke tuning over a wide 10-60 mm range and utilizes a male threaded rod end. Note that a plain cylinder does not hold its load on air loss or when a valve is centered; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, 60 mm maximum stroke, 50 mm window, PT1/8 port, and lack of a magnet for this SKU.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The M10x1.25 R screw shortens the extend stroke by up to 50 mm, yielding a usable 10-60 mm range. It acts as a mechanical stop and does not alter force. It is not a lock; the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.