
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-30S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X65-30S is a compact double-acting double-rod cylinder featuring an external M10x1.25 adjuster screw that dials the extend stop directly on your machine. You can tune the outward stroke anywhere from 35 to 65 mm without swapping shims or parts, while the retract remains full length. The short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit.
End shock is managed by a fixed NBR bumper that decelerates the stroke end, which is not an adjustable air cushion. Equipped with a built-in magnet, this unit supports AirTAC reed or electronic switches for precise position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 65 mm |
| Adjustable range | 35 – 65 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 65 mm via the M10 screw during product family swaps, eliminating the need to physically swap cylinder shims.
Use the 30 mm window to find the exact clamping depth during prototype runs before locking the adjuster screw for production batches.
Choose this specific model if your fixture changeovers demand frequent on-site stroke tuning between 35 and 65 mm.
Confirm the 32 mm bore, 65 mm maximum stroke, 30 mm window, and PT1/8 port match your manifold. The -S magnet accommodates reed or solid-state sensing, and the female M6x1.0 rod end thread handles your mounting needs. Remember that a plain cylinder does not hold a load on air loss or valve centering; the fixed bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The M10x1.25 R screw shortens the extend stop by up to 30 mm, giving a usable range of 35 to 65 mm without altering force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.