
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X70-10 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X70-10 is a compact double-acting double-rod cylinder featuring an external extend stop. A front M10x1.25 adjuster screw lets you dial the outward stroke down by 10 mm, yielding a usable 60 to 70 mm range directly on the machine without swapping shims or parts.
The short riveted body minimizes axial mounting depth where space is tight. End shock is handled by a fixed NBR bumper that decelerates the stroke, though it is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X70-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 70 mm |
| Adjustable range | 60 – 70 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 60 to 70 mm to align varying jig heights during product family swaps without machining new spacers.
Set the exact 64 mm reach required to press a delicate sub-assembly into a housing, avoiding over-travel damage.
Choose it when you need on-site stroke tuning for frequent format changeovers.
Confirm the 32 mm bore, 70 mm maximum stroke, 10 mm window, and PT1/8 port. This base configuration has a female M6x1.0 rod thread and no magnet. Remember that a plain cylinder drifts if air is lost or the valve centers; the fixed bumper only softens the end impact and will not lock the load. For secure holding without live pressure, add an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
Turning the external M10x1.25 screw shortens the extend endpoint from the 70 mm maximum down to 60 mm. The retract stroke remains full.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.