
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X70-10S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X70-10S is a double-acting compact cylinder featuring an external R (M10x1.25) adjustment screw that dials the extend stop precisely between 60 and 70 mm. Its short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit.
Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic solid-state switches directly in the body sensor grooves. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s, making it highly versatile for dynamic sequencing tasks.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X70-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 70 mm |
| Adjustable range | 60 – 70 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 60-70 mm extend stop via the M10x1.25 screw during initial tooling setup to find the exact contact point before locking down the fixture.
Fine-tune the actuator reach on a packaging line to accommodate varying carton widths without swapping out the entire cylinder body.
Operators needing frequent on-site stroke tuning during changeovers will benefit from the 10 mm adjustability window. Confirm the PT1/8 port, 70 mm nominal stroke, female M6x1.0 rod-end thread, and the -S magnet for sensing. Remember that a plain cylinder does not hold position on air loss; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 82 kgf at 1.0 MPa.
The external R (M10x1.25) screw shortens the extend stroke on-site from the 70 mm maximum down to 60 mm without shims. The -S suffix indicates a built-in piston magnet for use with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.